No temp reading on temp guage
#1
No temp reading on temp guage
I replaced the tempsensor below the EGR valve on the engineand I still am not getting a temp reading. Is their another sensor on the radiator or something that I am missing? Any other ideas like a fuse or something?
My cluser is 100% working and the temp lights up full when I turn the ignition to on.
My cluser is 100% working and the temp lights up full when I turn the ignition to on.
#2
RE: No temp reading on temp guage
Um, what engine/year vehicle?
#3
RE: No temp reading on temp guage
On my 89 Jimmy there are two sensors one for the gage and one for the Computer. The gage sensor is on the side of the engine block near the dipstick. The ECU one is by the water inlet at the intake manifold.
#4
RE: No temp reading on temp guage
It is a 93-94 4.3 cpi engine W 4x4 s-10. I replaced the one sensor that is right by the EGR but I suppose I am missing one somewhere else on the engine, I need a chiltons.
#5
RE: No temp reading on temp guage
It's on the passenger side, near the spark plugs (I think near #4, iirc). That is the one-wire sensor.
Thread
Thread Starter
Forum
Replies
Last Post
das96blazer
2nd Generation S-series (1995-2005) Tech
18
03-09-2011 05:21 PM
streblo
2nd Generation S-series (1995-2005) Tech
3
11-25-2009 10:56 PM