97 S10 Blazer Rod Bearings 4.3
#3
grab yourself a chiltons manual at checker/oreilley auto parts
it will tell you what is possible with the engine installed.
if im correct. as i havnt done it yet if its a 2wd you must pull the engine to remove the pan.
if its a 4wd you must disconnect the frond drive assy and move it forward to pull the pan.
as for the rods and mains the book should tell you what is possible and how to get it done.
good luck. please include more info on truck to get a more specific answer.
let us know how it turns out.
it will tell you what is possible with the engine installed.
if im correct. as i havnt done it yet if its a 2wd you must pull the engine to remove the pan.
if its a 4wd you must disconnect the frond drive assy and move it forward to pull the pan.
as for the rods and mains the book should tell you what is possible and how to get it done.
good luck. please include more info on truck to get a more specific answer.
let us know how it turns out.
Thread
Thread Starter
Forum
Replies
Last Post
chevygonzalez
Engine & Transmission
1
10-31-2010 08:11 PM